|
|
| (One intermediate revision by one user not shown) |
| Line 1: |
Line 1: |
| | {{GlossaryTermTemp | | {{GlossaryTermTemp |
| | |Abbreviation=STC | | |Abbreviation=STC |
| − | |SubtermOf=Photovoltaik | + | |SubtermOf=Photovoltaik, PV, Solar Cell |
| | |Definition=1. "STC stands for “Standard Test Conditions” and are the industry standard for the conditions under which a solar panel are tested. By using a fixed set of conditions, all solar panels can be more accurately compared and rated against each other. There are three standard test conditions which are: | | |Definition=1. "STC stands for “Standard Test Conditions” and are the industry standard for the conditions under which a solar panel are tested. By using a fixed set of conditions, all solar panels can be more accurately compared and rated against each other. There are three standard test conditions which are: |
| − | 1. Temperature of the cell – 25°C. The temperature of the solar cell itself, not the temperature of the surrounding. | + | 1.1 Temperature of the cell – 25°C. The temperature of the solar cell itself, not the temperature of the surrounding. |
| − | 2. Solar Irradiance – 1000 Watts per square meter. This number refers to the amount of light energy falling on a given area at a given time.
| + | 1.2 Solar Irradiance – 1000 Watts per square meter. This number refers to the amount of light energy falling on a given area at a given time. |
| − | 3. Mass of the air – 1.5. This number is somewhat misleading as it refers to the amount of light that has to pass through Earth’s atmosphere before it can hit Earth’s surface, and has to do mostly with the angle of the sun relative to a reference point on the earth. This number is minimized when the sun is directly above as the light has to travel a minimum distance straight down, and increases as the sun goes farther from the reference point and has to go at an angle to hit the same spot."
| + | 1.3 Mass of the air – 1.5. This number is somewhat misleading as it refers to the amount of light that has to pass through Earth’s atmosphere before it can hit Earth’s surface, and has to do mostly with the angle of the sun relative to a reference point on the earth. This number is minimized when the sun is directly above as the light has to travel a minimum distance straight down, and increases as the sun goes farther from the reference point and has to go at an angle to hit the same spot." |
| | 2. "STC stands for Standard Test Conditions and is the major solar panel output performance testing condition used by most manufacturers and testing bodies." | | 2. "STC stands for Standard Test Conditions and is the major solar panel output performance testing condition used by most manufacturers and testing bodies." |
| − | |Sources=http://www.siliconsolar.com/what-are-standard-test-conditions-stc/ (1.); http://sinovoltaics.com/learning-center/quality/standard-test-conditions-stc-definition-and-problems/ (2.) | + | 3.STC is an industry-wide standard to indicate the performance of PV modules and specifies a cell temperature of 25°C and an irradiance of 1000 W/m² with an air mass 1.5 (AM1.5) spectrum. |
| | + | 4. Standard Test Conditions create uniform test conditions which make it possible to conduct uniform comparisons of photovoltaic modules by different manufacturers. The test conditions are defined as follows - irradiation: 1000 W/m², temperature: 25°C, AM: 1,5 (AM stands for Air Mass, the thickness of the atmosphere; at the equator, air mass = 1, in Europe approx. 1,5). |
| | + | |Sources=http://www.siliconsolar.com/what-are-standard-test-conditions-stc/ (1.); http://sinovoltaics.com/learning-center/quality/standard-test-conditions-stc-definition-and-problems/ (2.); http://sinovoltaics.com/learning-center/quality/standard-test-conditions-stc-definition-and-problems/ (3.); http://www.energetica-pv.com/index.php?id=447 (4.) |
| | }} | | }} |
| − | Author: Charly Krüger | + | Author: Charly Krüger; <span class="author-g-ahklz122zadndvax2gwl">Alexander Kravchik</span> |
Latest revision as of 10:30, 3 November 2017
[edit] Definition
1. "STC stands for “Standard Test Conditions” and are the industry standard for the conditions under which a solar panel are tested. By using a fixed set of conditions, all solar panels can be more accurately compared and rated against each other. There are three standard test conditions which are:
1.1 Temperature of the cell – 25°C. The temperature of the solar cell itself, not the temperature of the surrounding.
1.2 Solar Irradiance – 1000 Watts per square meter. This number refers to the amount of light energy falling on a given area at a given time.
1.3 Mass of the air – 1.5. This number is somewhat misleading as it refers to the amount of light that has to pass through Earth’s atmosphere before it can hit Earth’s surface, and has to do mostly with the angle of the sun relative to a reference point on the earth. This number is minimized when the sun is directly above as the light has to travel a minimum distance straight down, and increases as the sun goes farther from the reference point and has to go at an angle to hit the same spot."
2. "STC stands for Standard Test Conditions and is the major solar panel output performance testing condition used by most manufacturers and testing bodies."
3.STC is an industry-wide standard to indicate the performance of PV modules and specifies a cell temperature of 25°C and an irradiance of 1000 W/m² with an air mass 1.5 (AM1.5) spectrum.
4. Standard Test Conditions create uniform test conditions which make it possible to conduct uniform comparisons of photovoltaic modules by different manufacturers. The test conditions are defined as follows - irradiation: 1000 W/m², temperature: 25°C, AM: 1,5 (AM stands for Air Mass, the thickness of the atmosphere; at the equator, air mass = 1, in Europe approx. 1,5).
[edit] Abbreviation
STC
[edit] Synonyms
[edit] Superterms
Photovoltaik, PV, Solar Cell
[edit] Subterms
[edit] Sources
String representation "http://www.sili … php?id=447 (4.)" is too long.
Author: Charly Krüger; Alexander Kravchik
